ALLOY 600 DATA SHEET UNS N06600 //// Alloy 600 (UNS designation N0660) is a nickel-chromium alloy designed for use in applications from cryogenic to elevated temperatures in the range of 2 000 °F (1 093 °C). Alloy 600 is non-magnetic and readily weldable. //// The alloy is used in a variety of corrosion resisting applications. The high nickel
Effect of carbide precipitation on the corrosion behavior INCONEL alloy 690, an austenitic, high-chromium modification of INCONEL alloy 600, was developed to resist stress-corrosion cracking and general corrosion in hightemperature aqueous environments associated with nuclear steam generators.
Over the years, the nickel-chromium-molybdenum/tungsten alloys have proven to be among the most reliable and cost-effective materials for aggressive seawater applications. Of these, INCONEL® 625 is considered acceptable and the HASTELLOY® C-type alloys (C, C-4, C-276, C-22®) are considered optimum. Nominal Composition Weight %
Inconel 600 pdf - Heanjia Super Metals Co. Ltd.The potential of alloy 600 to crack transgranularly in the chloride solutions decreases with an increase in concentration of nickel. Inconel 600 consists of 72% nickel that is highly adequate to resist the stress corrosion cracking in the chloride solutions. Sulfur Inconel 600 provides excellent resistance to sulfur compounds at the intermediate
The effects of heat treatment on the chromium depletion Oct 01, 1989 · The Huey test was also performed in a boiling 65 pct HNO 3 solution for 48 hours to study the intergranular attack (IGA) resistance of this alloy. Both tests showed that INCONEL 690 has very good corrosion resistance. It is believed that the superior IGA and SCC resistances of this alloy are due to the high chromium concentration (30 wt pct).
Abstract. INCONEL alloy 690, an austenitic, high-chromium modification of INCONEL alloy 600, was developed to resist stress-corrosion cracking and general corrosion in hightemperature aqueous environments associated with nuclear steam generators. Tests in nitric acid and nitric-hydrofluoric acid show that the high chromium content provides alloy 690 with good resistance to highly oxidizing