A36 is a ASTM International specification for carbon steel. The A36 carbon steel specification covers shapes, plates and bars of structural quality. It is used in riveted, bolted or welded construction of bridges, buildings and for general structural purposes.
ASTM A36 Carbon Structural Steel Plate SpecificationQualified A36 steel product shall have ultimate tensile strengths ranges from 58,000 to 79,800 psi. It is not a exact number for it is affected by its chemical composition and production method. In tensile testing, ASTM A36 steel bar can elongate to around 20% of its original length. It also shows excellent impact strength at room temperature.
ASTM A36 Steel Channel - Galvanized or Primed. ASTM A36 steel channel is hot-rolled, low carbon steel section with good properties including welding, machinability and ductility.A36 structural channel have two types of sizes:UPN & UPE - tapered flanges and parallel flanges respectively. If you can't find the specific size in the table below, bespoke channel dimensions are available.
ASTM A36 Steel, bar - MatWeb20 rows · Compressive Yield Strength :152 MPa:22000 psi:Allowable compressive strength:Bulk Modulus
ASTM A36 Structural Angle Steel For Construction, Tower ASTM A36 Angle Steel Bar for Construction, Machines & Towers. Hot rolled ASTM A36 steel angle bar is the most widely used structural steel by the construction industry as its very economical cost. Structural mild A36 angles are manufactured by rolling pre-heated blooms into an angle shape.
The ASTM A7 and A9 standards were consolidated in 1939 into one ASTM A7 standard for bridges and buildings. This remained the primary structural steel standard until the early 1960s when ASTM A36 became the predominant structural steel used for building construction. Other types of high-strength
Grade Guide:A36 Steel Metal Supermarkets - Steel
Chemical CompositionDesignationOther Mechanical PropertiesHow A36 Is MadeCommon Uses of A36Unlike most AISI grades such as 1018, 1141, or 4140, American Society for Testing and Materials (ASTM) A36 steel is not designated by chemical composition. Instead, A36 is designated by mechanical properties. This means that while most grades must have added alloys that fit between certain percentages, A36 must meet specific mechanical standards. For example, steel bars and plates must have a minimum yield strength of 36,000 pounds per square inch. While there are some chemical compASTM A36 steel plate thickness tolerance steel plate,ASTM ASTM A36 steel plate is the most purchased hot rolled steel plate in the world and the least expensive of the commercial carbon steels. The heat ability reates very good welding properties, and the 36 ksi yield strength makes ASTM A36 steel plate acceptable for most applications. A36 is considered a mild steel due to its relatively moderate hardness.
Structural Steel (A36/44W, A572-50/50W, 50WT) Terra Minimum yield strength of 36,000 psi. Minimum tensile strength of 58,000 to 80,000 psi. ASTM A36 is a common structural steel grade specified within the American Society for Testing and Materials (ASTM) standards. This mild, low carbon steel is easily flame cut, drilled, formed, welded and machined.
ASTM A36 has a yield strength of 36,000 psi and an allowable bending stress of 22,000 psi. The properties of ASTM A36 steel allow it to deform steadily as stress is increased beyond its yield strength.Typical yield strength - A36 Steel API 5L X65 ASTM Yield strength (MPa) Ultimate strength (MPa) Density (g/cm³) ASTM A36 steel:250:400:7.8:Steel, API 5L X65 (Fikret Mert Veral) 448:531:7.8:Steel, high strength alloy ASTM A514:690:760:7.8:Steel, prestressing strands:1650:1860:7.8:Piano wire:22002482 7.8:High density polyethylene (HDPE) 26-33:37:0.95:Polypropylene:12-43:19.7-80:0.91:Stainless steel AISI 302 - Cold-rolled:520