EN 10025 S275 JR SS 400:1.5mm to 100mm 4' x 8' 5' x 20 6' x 20:High Tensile Steel Plates:BS 4360 Gr 50 B EB 10025 S355 JR EH 36:4.5mm to 50mm 8' x 20' 8' x 30' Mild Steel Ship Plates:ABS Gr A Lloyds Gr A:6mm to 32mm 8' x 30' Boiler Plates:ASME SA 516 Gr 70:9mm to 50mm 8' x 30' Mild Steel Chequered Plates:ASTM A36 BS 4360 Gr 43A SS 400
BS EN10025 S275 /S355 /S420 /S460 - Steel Exporter BeBon BS EN 10025 has recently been revised (2004), and subsumes standards such as the 1993 versions of BS EN 10025, BS EN 10113, BS EN 10137 and BS EN 10155. Furthermore, designers may be more familiar with the material grades of old standards such as BS 4360, so comparisons are useful.However, it must be stressed that the new steels are not simply the old steels with new names - there are some
EN10025 S235JRG3 steel plate is one mainly of low alloy steel. EN10025 S235JRG3 steel plate the material number is 1.0116. S235JRG3 steels equivalent grades are DIN 17100 St 37-3 N, NFA 35-501 E 24-4, UNI 7070 Fe 360 D, BS 4360 40 D, UNE 36.080 AE 235 D.
EN10025-4 S460ML Offshore Steel Plates S460ML steel Steel Standard:EN 10025-3 Grade:S460ML(1.8838) Thickness:10 to 100m Width:up to 3.5 metres Length:Up to 12 metres Approval By Third Party:ABS, DNV, GL, CCS, LR , RINA, KR, TUV, CE Classification:Normalized rolled weldable fine grain structural steels
En10025 S235JRG2 steel plate steel plate,En10025 S235JRG2 En10025 S235JRG2 steel plate is the European standard for Low-alloy structural steel, equivalent national standard Q235B, S235JRG2 steel plate is a lower carbon content of carbon structural steel, for welding, bolting, riveting structure more. En10025 S235JRG2 steel plate Chemical composition (%) C0.2 Si0.55 Mn1.4 Ni0.3 P0.045 S0.045 Cr0.3 Mo0.08 Al0.02.
Lesegno:from 30 to 70 mm in 4,6 - 7,5 m lenght Cerveno:from 47 to 105 mm in 3 - 12 m lenght Sellero:100 ÷ 160 mm in 3 - 12 m lenght. RIVA ACCIAIO EN 10025-95 QUALITIES AND MAIN CORRESPONDING INTERNATIONAL STANDARDS EN 10025-04 EN 10025-95 Italy UNI EN 10025-90 Germany DIN 17100 France AFNOR NF A 35.501 U.K. B.S. 4360
Hot rolled products of structural steelsBS EN 10025-1:2004 together with BS EN 10025-5:2004 supersedes BS EN 10155:1993, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/12, Structural steels, which has the responsibility to:A list of organizations represented on this committee can be
Hot rolled products of structural steelsEN 10025-2:2004 (E) 4 Foreword This document (EN 10025-2:2004) has been prepared by Technical Committee ECISS/TC 10 Structural steels - Grades and qualities, the secretariat of which is held by NEN. This European Standard shall be given the status of a
Class 1 Class 2 Class 3 Class 4 Class 5 Class 6 Class 7 22MN B5 AMSA HR X ABS SHIP PLATE GR A X X ABS/LLOYDS GRA X X API 5L L245/GR B X API 5L L290/X42 X API 5L L360/X52 X EN 10025 -2-S355 X EN 10025 -5-S355J0WP+AR X EN 10028 -2-P2 35GH+AR X EN 10028 -2-P265GH+AR X
PED Certified OHSAS 18001:2007 ISO 9001 :2008 ISO BS EN 10025-5:2004 d y London h k y, London h k. d r 22 06 53 36 T, d y) National foreword The I.IK participation in pi epai ation was entrusted to Technical Committee ICE/12. Qtr steels, whichhas responsibilit to: aid enquirer s to the present to the responsible international/European committee and
What is en s690ql1 equivalent grade - Steel Material SupplierGangsteel supply EN 10025-6 S690QL1 steel plate and we also had S690QL1 stock list thickness from 5mm to 300mm.We also can provide VL, ABS, BV 3.2 certificate for ship project. EN10025-6 S690QL1 is Alloy special steel with specified minimum values of impact energy at temperatures not lower than -60 °C.
en 10025-6 s890ql abs grade d steel plate manufacturer. Depending on the relevant design code this can lead to the necessity of bigger bending radiuses than indicated within the chart. For bigger chilly forming amounts we advocate you to consult the steel producer prior to ordering. Quenched and tempered plate, a metal that is stronger and more Structural steel grade designations according to EN according to EN 10027-1:2005, EN 10025-2:2004, EN 10025-4:2004 Steel group structural steel Mechanical characteristics XXX min. yield strength inMPa example EN 10025-2:S 355 J2 + Z35 + M Mechanical characteristics Special requirements notch Z15toughness min. 15%reduction of area min. 27 J min. 40 J Temp. °C